1. Slatted Single-Bin Enclosure With a Roof
Alt text: Wooden single-bin trash can enclosure with a slatted roof and black trim, with a wheelie bin being rolled out. Photo: Woodshop Diaries
The best starting point if you have one bin and a narrow strip beside the house. Vertical wood panels on a black-framed carcass with a slatted top give ventilation and a finished look, and it sits on a gravel base so nothing rots at the bottom rail.
- Materials: 1×6 or 1×4 boards for panels, 2×2 or 2×3 frame, slatted roof battens, exterior screws, gravel for the base.
- Rough cost: $90–$180. Free step-by-step plans with a materials list are available from YellaWood, who rate it a four-hour project.
- Pro tip: Build the base rails to sit on gravel or a paver pad, never directly on soil — ground contact is what kills wooden bin stores first.
- Check first: Confirm your bin’s height with the lid fully open. The roof needs to clear it, or you’ll be fighting the structure twice a week.
2. Two-Bin Shed With Double Doors and a Slatted Roof
Alt text: Two-bin wooden trash can storage shed with barn-style double doors and cross-braced fronts. Photo: Wilker Do’s — this photo includes an inset plan diagram from the build guide.
The classic full-size build: a plywood or plank box sized to two standard bins, with front doors for access, a slatted roof for airflow, and diagonal bracing so the doors don’t sag. This design is fully documented in a two-part build series, Part 1 and Part 2, with paid plans available Wilker Do’s.
- Materials: 2×4 frame, 1×6 shiplap or fence boards, slatted roof battens, 2 tee hinges per door, barrel bolt latches, exterior screws and glue.
- Rough cost: $150–$300, matching the typical range for a garbage container enclosure shed HowToSpecialist.
- Pro tip: Put the doors on the long side if you pull bins straight out toward the street, and on the short end if you wheel them around a corner. Getting this wrong is the single most common regret on bin sheds.
- Roof detail: Slats, not a solid panel. Sealed boxes trap damp air and smell; slatted roofs let bins dry out.
3. Fully Enclosed Bin Cabinet With a Side Door
Alt text: Fully enclosed pressure-treated wooden bin cabinet with a solid top, black hardware and a side-access door. Photo: Pine and Poplar
When you want the structure to read as furniture rather than a bin store, go fully enclosed: solid walls, a slightly sloping top, and a side door so the front stays visually clean from the street.
- Materials: Pressure-treated lumber frame, horizontal tongue-and-groove or shiplap boards, plywood top, tee hinges, gate latch, deck screws.
- Rough cost: $180–$320.
- Pro tip: A side door works beautifully where the enclosure sits against the house — you step around the corner to load it, and the street sees nothing but a tidy wooden box.
- Ventilation note: If you fully enclose it, add a vent gap under the lid or a few drilled holes high on the back panel. Sealed solid wood units hold moisture against the bin.
4. Pallet Double-Bay Store With Independent Top Lids
Alt text: Pallet wood double-bay bin store with hinged front doors and independent lifting lids, one bin visible inside. Photo: Pallets Pro
The clever part here isn’t the pallet wood — it’s the dual-access design. Independent lifting top lids let you toss a bag in without opening the front doors, while the doors stay for pulling whole bins out.
- Materials: Free pallet wood for cladding, some bought 2×3 or 2×4 for the structural frame, tee hinges, barrel bolts, weatherproof stain.
- Rough cost: $30–$80 if you source pallets free.
- Pro tip: Use pallet wood only for the skin, never for the frame or the ground-contact rails. Pallet timber is untreated and inconsistent in strength.
- Durability reality check: In a UK DIY thread on pallet bin stores, one commenter noted a pallet-wood outdoor storage box rotted away after 2–3 years r/DIYUK. Treated frame + stained pallet cladding + a gravel base is what gets you past that.
5. Open-Front Pallet Lean-To for Three Bins
Alt text: Rustic pallet wood lean-to bin shelter with a slatted roof holding three wheelie bins on a paved driveway. Photo: Garden Geek
Skip the doors entirely. An open-front shelter with a slatted roof and enclosed sides and back keeps bins dry, hides them from most angles, and lets you roll them in and out in one movement — ideal if you’re collecting bins weekly.
- Materials: Reclaimed pallet timber, 2×3 framing, slatted roof battens, concrete pavers under the footprint.
- Rough cost: $40–$100.
- Pro tip: Open-front shelters are the easiest to build and the easiest to live with, but they hide bins best when they face away from the street and are set against a hedge or fence, as in this build.
- Sizing: Measure your widest bin plus 2 inches of clearance per bay. UK-style wheelie bins and US 64/96-gallon bins differ substantially, so never build to a generic dimension.
6. Pallet Bin Store With Chevron Slat Doors
Alt text: Recycled pallet wood bin store with chevron-pattern slatted doors and a slatted top against a brick wall. Photo: r/DIYUK
Chevron-laid slats cost nothing extra but turn a utilitarian bin box into something that looks deliberately designed. This three-compartment version uses recycled pallet timber throughout.
- Materials: Pallet wood slats at 45°, 2×3 frame, hinges, latches, exterior stain or paint.
- Rough cost: $50–$110 including hardware and finish.
- Pro tip: Cut your chevron slats at a consistent 45° and dry-fit the whole door before gluing — chevron patterns reveal every discrepancy at the seams, far more than vertical slats do.
- Multi-bin tip: Compartments should match your waste streams (general, recycling, garden), not just the bin count.
7. Horizontal Slat Privacy Screen With Solar Post Caps
Alt text: Freestanding horizontal slatted wood privacy screen with solar post caps concealing bins next to a garage. Photo: Mrs. Ashley French
A screen is the fastest version of this whole category: two posts, horizontal slats, no roof, no doors, no floor. It hides bins from one direction — usually the street — and takes an afternoon.
- Materials: Two 4×4 posts set in concrete or post spikes, 1×4 or 1×6 horizontal slats, exterior stain, optional solar post caps.
- Rough cost: $70–$160.
- Pro tip: Set the posts first and let the concrete cure before you attach any slats. Screens that lean within a year almost always skipped that step.
- Where it fails: A single-panel screen only blocks one sightline. Stand at your front door and at the street to check both before you build.
8. Lattice Screen on a Wooden Frame
Alt text: DIY wooden privacy screen frame with white vinyl lattice insert concealing a galvanized trash can. Photo: Four Generations One Roof — the source image is a two-panel blog graphic with an overlay caption.
Lattice lets air move freely, which matters if you store bins against a wall or in a spot that gets afternoon sun. Building the frame in wood and dropping in a lattice insert keeps the cost low and the assembly simple.
- Materials: 1×3 or 1×4 frame lumber, vinyl or wood lattice panel, staples or lattice trim, exterior paint or stain.
- Rough cost: $45–$120. If you’d rather buy the panel ready-made, 4-panel outdoor lattice screens built for trash can and equipment enclosures are widely available Amazon, and 38-inch three-panel solid wood lattice screens are stocked at home centers The Home Depot.
- Pro tip: Lattice is not structural. The frame carries the wind load — design the frame to stand alone and the lattice to be nothing but infill.
- Video walkthrough: There’s a step-by-step build on hiding a garbage can behind a lattice screen YouTube.
9. Cedar L-Shaped Corner Slat Screen
Alt text: Stained cedar L-shaped corner slatted screen used to conceal trash cans and equipment. Photo: Bleck & Bleck Architects
If your bins live in a corner, wrap the screen around both sides. An L-shaped run of stained slats on solid corner posts screens two sightlines with one build and looks intentional from every approach.
- Materials: Cedar or stained pine boards, 4×4 corner posts, 2×4 blocking, exterior stain, concrete anchors if over a hard surface.
- Rough cost: $150–$300 for a large L-run.
- Pro tip: Stain the boards before assembly. Getting an even finish on a finished corner screen with slats tight together is far harder than staining flat boards first.
- Design note: This is the screen style that most closely mimics an architectural fence, which makes it the safest choice if you’re submitting it to an HOA or design review.
10. Open Three-Sided Bin Corral From Fence Pickets
Alt text: Three-sided open-front trash can corral built from unfinished dog-eared fence pickets. Photo: Homestead Fence Co
The simplest permanent structure on this list: three walls of pickets, no roof, no doors. It corrals bins and screens them from the sides, and because it’s open, bins dry out after rain.
- Materials: Dog-eared fence pickets, 2×3 or 2×4 rails, posts, galvanized screws or nails, exterior sealer.
- Rough cost: $60–$150 for a three-to-four bin corral.
- Pro tip: Nail the pickets to the outside face of the rails so the smooth side faces the street, and add a rail on the inside at bin height — that’s the contact point that gets battered weekly.
- Fastest finish: A coat of exterior sealer on unfinished pickets roughly doubles how long they last against ground moisture.
11. Fence-Picket Storage Chest With a Hinged Lid
Alt text: DIY wooden storage chest built from fence pickets with a hinged, cross-braced lid, sized to hold two trash cans. Photo: Build It Thrifty
The cheapest build here, and the one to copy if budget is the constraint: a chest with a hinged lid rather than doors, sized to hold two bins or a bin plus garden gear. This build used 24 1x6x6′ treated cedar fence boards and came in around $50 in lumber Build It Thrifty.
- Materials: 24 × 1x6x6′ treated fence boards (or equivalent), hinges, latch, exterior screws.
- Rough cost: ~$50 in lumber for the documented build; $60–$120 if you add a plywood floor or a stained finish.
- Pro tip: Cross-brace the lid, as this build does. A wide unbraced lid twists and stops sealing within a season.
- Where to use it: Ideal against a side wall where a lid is easier to open than doors — and much cheaper to build.
12. Bin Store With a Living Green Roof
Alt text: Compact wooden two-bin enclosure with horizontal slat sides and a living green sedum roof. Photo: DigsDigs
The move that turns a bin store into a feature: build the roof as a shallow planter and cover it with sedum. Bins stay dry, the structure disappears into the garden, and you gain planting space instead of losing it.
- Materials: Wooden enclosure shell, roof box with an EPDM or liner membrane, drainage layer, sedum tray or plug plants, lightweight growing medium.
- Rough cost: $200–$400, with the green roof adding roughly $60–$120 over a plain slatted top.
- Pro tip: Use a genuine drainage layer and don’t use ordinary garden soil — it’s too heavy and too wet for a roof structure.
- Maintenance: A sedum roof needs almost no care, but keep the front edge clear so you can still reach the bins.
13. Green-Roof Bin and Recycling Store With Caddy Shelves
Alt text: Wooden bin store with a living green roof, one full-size wheelie bin and shelving for small recycling caddies. Photo: Etsy — Wheelie Bin & Recycling Store
The best layout on this list for anyone sorting waste into more than one stream. A single bay takes the full-size bin; a three-tier shelf alongside it holds small recycling caddies so they stop migrating around the yard.
- Materials: Wooden frame and slats, shelf boards on cleats, roof planter box, drainage membrane, sedum.
- Rough cost: $220–$420 depending on roof treatment and finish.
- Pro tip: Size the shelving to your caddy dimensions before cutting — small caddies and tubs vary widely, and a 1-inch miss means everything sits crooked.
- Why it works: Separating streams inside one tidy structure is what actually stops recycling piling up by the back door.
14. Weathered Timber Bin Store With Recycling Tub Shelves
Alt text: Slatted timber bin and recycling store with slanted roof, holding a blue wheelie bin and three grey recycling tubs on shelves. Photo: Cassie Fairy
Built from leftover timber, this one uses a three-compartment plan: a caddy bay on the left, a central three-tier shelf for recycling tubs, and a full-height bay on the right for the wheelie bin. The slanted slatted roof sheds water without pooling.
- Materials: Leftover or reclaimed timber, slanted roof battens, shelf boards, exterior stain, hinges for the front panels.
- Rough cost: $60–$150.
- Pro tip: A slight roof slope toward the back, not the front, keeps drips off you while you’re loading bins in the rain.
- Design principle: Match bays to what you actually own. Three small tubs in shelves and one big bay for the main bin is more useful than three identical bays.
15. Slatted Enclosure in a Metal Frame — On Castors
Alt text: Slatted wood bin enclosure built into a black metal frame with castor wheels and swinging gates, concealing two bins. Photo: Enclo Screens
The upgrade path for anyone who needs to move the enclosure on collection day. Wood slats inside a metal frame, with castors on the base and gates that swing open, gives you slatted-screen looks plus a structure you can roll out of the way.
- Materials: Steel or aluminum frame (or milled hardwood frame), slat boards, heavy-duty castors, gate hinges and latches.
- Rough cost: $250–$500 if you’re buying a frame of this type; $150–$300 to fabricate a timber equivalent with castors.
- Pro tip: Only build on castors if you need them — castors raise the whole structure, which means you have to lift bins slightly higher every time you load them.
- Design takeaway to copy for free: Mounting slats inside a contrasting frame instead of edge-to-edge wood is what gives this its contemporary look. It works just as well in a plain painted timber frame.
DIY vs Off-the-Shelf: What the Numbers Say
| Option | Typical cost | Effort | Best for |
|---|---|---|---|
| Fence-picket chest (idea 11) | ~$50 in lumber | Weekend | Tight budgets, one or two bins |
| Pallet store (ideas 4–6) | $30–$110 | Weekend+ | Free/cheap materials, DIY skills |
| Lattice or slat screen (ideas 7–9) | $45–$160 | One afternoon | Fastest fix for HOA visibility rules |
| Full DIY enclosure (ideas 1–3) | $150–$320 | 1–2 weekends | Best all-round value |
| Green-roof store (ideas 12–13) | $200–$420 | 1–2 weekends | Turning the store into a garden feature |
| Resin bin shed, bought | ~$432–$860 Keter | Assembly only | No tools, no skills |
| Cedar bin shed, bought | ~$1,000 Storage Shed Shop | Assembly | Ready-made cedar finish |
| Cedar utility shed, bought | ~$2,199 EarthEasy | Assembly | Large capacity, storage for bikes/tools too |
| Custom clear cedar enclosure | ~$10,100 The Carpentry Shop Co | None — installed | High-end architectural match |
A DIY build in the $150–$300 band sits comfortably below the cheapest bought-in option while giving you a structure sized to your own bins and sightlines.
FAQ
How much does it cost to build a trash can enclosure? Budget $150–$300 for a standard garbage container enclosure shed in materials HowToSpecialist, or as little as about $50 if you build a simple chest from treated fence boards as in this build. Free pallets can cut the material cost further.
Will my HOA allow a trash can enclosure? Most HOAs simply require bins to be out of public view — typically in a garage, behind a fence, or otherwise not visible from the street NRP Management. A fence-style slatted screen or an enclosure that matches your home’s materials is usually the smoothest approval path. Read your CC&Rs and check heights before building.
What’s the fastest DIY option to hide trash cans? A privacy screen: two posts and horizontal slats, no roof or doors, built in an afternoon for $70–$160. A lattice screen on a wooden frame is similar effort and often cheaper.
Do pallet wood bin stores last? Pallet timber is untreated, and one DIYer reported a pallet-wood outdoor box rotting within 2–3 years r/DIYUK. Use treated lumber for the frame and ground-contact rails, keep the pallet wood as cladding only, stain it, and set the whole thing on gravel or pavers.
Should the bin enclosure have a roof? Slatted roofs are the sweet spot: they keep rain off and let bins dry out. A fully sealed box holds damp air against the bins, so if you enclose it completely, add vents near the top.
Can I build a bin store that holds both rubbish and recycling? Yes, and it’s the better design. Ideas 13 and 14 use one tall bay for the main bin plus shelves for smaller recycling caddies, so separated waste stays tidy instead of piling up by the door.
Conclusion
Outdoor bin storage comes down to three decisions: how many bins, which direction they need hiding from, and how much weather protection you need. A screen is the fastest fix, a roofed enclosure is the most complete, and a green-roof store is the one your neighbors will ask about.
Skip to content





